Hinweise zum Import von: / Hints for importing:
STEP, STL, AutoCAD-DXF, NASTRAN, ABAQUS, ANSYS, COSMOS, Z88

Moderatoren: ccad, mz15, auroraIco, Lehrstuhl

vom peripero
#1816
i have been trying for a while to create 2D model and exsport DXF file to z88aurora , but i failed. :? i reffered to theory manual page 67 for guidline. can someone make a video for the tutorial? it will be very helpful. thnks :D
Benutzeravatar
vom mz15
#1820
Hello peripero,

in theory manual is individually explained step by step. So it should still work.

regards
mz15
vom peripero
#1825
i have follow the steps given carefully and when i try to import ,there was an error.
in the z88.log
## Z88.DXF for Z88NI.TXT wrong : ##
## identical nodes in element(s)...stop##

what does that mean? :shock:
vom peripero
#1826
sometimes the error says "Error in dxf file, identifier z88i1.txt not found.
vom ccad
#1827
Hello peripero,

how to prepare the AutoCAD drawing for use in Z88Aurora is descriped in the Theory Manual of Z88Aurora with great care starting from page 67. However, transferring AutoCAD DXF files to Z88 (both Z88Aurora & Z88V14OS) is a bit tricky because AutoCAD files feature only unstructured data giving positively no informations for the FE calculation:
- prepare the AutoCAD drawing in a special way, i.e. add the node and element informations. See pg. 67
- if you want to transfer a FE structure, see pg.75
- if you want to transfer a super structure, see pg. 85

To have a full example, download the open source Z88V14OS. See the first example "Fork Wrench" in the manual of Z88V14OS and load the file z88x.dxf into your AutoCAD program (--> Z88V14OS/EXAMPLES/B1). Thus, you'll get an idea how to proceed.
It is also very important that you use a genuine AutoCAD from Autodesk - there are many drawing programs around which state that they can file DXF files but these files are not fully compatible to the AutoCAD guidelines for DXF files. And be sure to store the files in AutoCAD R12 format.

The DXF converter of Z88 is very well well tested and runs fine but its success depends from the proper preparation of your DXF file.

Regards

Prof. Rieg
vom peripero
#1830
thanks for the feedback sir.

i notice in the example provided in z88, every dxf file comes with several .txt.
for example; in z88auroraV2,example b1 there is z88.dxf,z88control.txt,z88i1.txt,z88i2.txt and etc.
if i create a dxf file from autocad,how am i going to create those text file?

tq in advance
vom ccad
#1832
Hello peripero,

1. You must provide a DXF file, say peripero.dxf, either for direct input (see example 1 in the Z88V14 manual; the converter Z88X converts your DFX file into Z88I1.TXT, Z88I2.TXT & Z88I5.TXT) or for the mapped mesher Z88N (example 2; the converter Z88X converts your DFX file containing a super structure into Z88NI.TXT and runs then the mapped mesher Z88N resulting in a FE structure).
2. Every genuine AutoCAD version starting from 1998 up to now works. If in doubt choose AutoCAD R12 for the export format.

Regards

Prof. Rieg
vom peripero
#1838
hello dear z88 team,

for example, i have made the dxf file, ex. peripero.dxf..where should i locate the file? because i notice that z88x.exe in z88v14os (dxf converter) does not have the "add" button. so i wonder when i run the converter,which dxf file will be convert.

for your info i am currently doing the analysis of butt-joint welding and the analysis required a 2D model. what i am trying to do is just a 2D rectangle model to export into z88Aurora. thanks in advance for your precious time replying to me.
vom FRudolph
#1839
Hello peripero,

you have to locate your dxf file into the working directory.
Generally this means that the dxf-file and the executable file (z88x.exe) of the dxf-converter have to be in the same directory. As default the directory should be C:\z88v14os\bin\win64.
I hope this will help you.

Greetings

FRudolph
vom peripero
#1848
when i tried to convert z88x.dxf to z88ni.txt , an error "Z88X.DXF for Z88NI.TXT : first input group missing or wrong " what is that mean..?
vom mifris
#1849
Hello peripero,

that`s right. Only one file should be in the directory. If there are two, the converter doesn`t know which file he should use.
The error you got, means that there is an error in your dxf-file. The converter tries to write a new z88ni-file but he couldn`t. It is very important that this file has the right structure. For further informations please look at the theory-manual at page 32f (C:\Z88AuroraV2\docu\en\theoryguide.pdf) and the userguide.

Best regards
M. Frisch
Z88Aurora V5 released

Hey Dave, thank you for your feedback. We are gl[…]

Hallo Herrjakel, Ihr System ist eigentlich schon […]

Hallo ich versuche ein eine etwas komplizierteres[…]

3D spacecontroller

Da die Oberfläche von Z88Aurora weiterhin auf[…]