Rhinoceros 4

Hinweise zum Import von: / Hints for importing:
STEP, STL, AutoCAD-DXF, NASTRAN, ABAQUS, ANSYS, COSMOS, Z88

Moderatoren: ccad, mz15, auroraIco, Lehrstuhl

Antworten
Marek
Newbie
Beiträge: 4
Registriert: Do 8. Dez 2016, 00:15

Rhinoceros 4

Beitrag von Marek »

Hello,
I have a problem with imports .dxf, .stl, .step created in the program Rhinoceros.
There is no way I can import files to Z88Aurora - appears unknown error.
Please help solve the problem.

KeDee
Alumni
Beiträge: 12
Registriert: Mo 12. Mai 2014, 09:22

Re: Rhinoceros 4

Beitrag von KeDee »

Hello Marek,

please upload the files you cannot import so we can have a look at it.

Greetings
KeDee

Marek
Newbie
Beiträge: 4
Registriert: Do 8. Dez 2016, 00:15

Re: Rhinoceros 4

Beitrag von Marek »

Hello,
Here is a simple projects saved as: .dxf, .stl, .stp
https://megawrzuta.pl/filesgroup/c5c3aa ... bc6a3.html
Thank you for any help.
Regards,
Marek.

Benutzeravatar
SHautsch
Alumni
Beiträge: 380
Registriert: Mo 15. Apr 2013, 11:03

Re: Rhinoceros 4

Beitrag von SHautsch »

Dear Marek,

it is not possible to import arbitrary DXF files to Z88Aurora. These files need to be specially prepared in AutoCAD, like described in our theory guide (C:\Z88AuroraV3\docu\en\theoryguide.pdf) on page 76 et sqq.

The STL file could be imported and meshed without problems...please make sure you don't import assemblies - only a single part is supported in Z88Aurora V3.

The STEP file could also be imported and meshed without problems.

Maybe your installation auf Z88Aurora is corrupted? Did you install in C:\Z88AuroraV3\ or in the program files folder? This could produce problems. Also make sure you run it as an admin when you installed as an admin, as Z88Aurora must run its subprograms and needs the appropriate access rights.

Kind regards,
SHautsch

Marek
Newbie
Beiträge: 4
Registriert: Do 8. Dez 2016, 00:15

Re: Rhinoceros 4

Beitrag von Marek »

Hello,
Problem has been solved . The program must be installed and run as admin. Everything works fine ... :)
Thank you very much for your help :D :D
Regards,
Marek.

Benutzeravatar
SHautsch
Alumni
Beiträge: 380
Registriert: Mo 15. Apr 2013, 11:03

Re: Rhinoceros 4

Beitrag von SHautsch »

Dear Marek,

we are glad you could solve the problem. Enjoy using Z88Aurora and come back here if you experience further problems.

Kind regards,
SHautsch

Antworten