Import error

Hinweise zum Import von: / Hints for importing:
STEP, STL, AutoCAD-DXF, NASTRAN, ABAQUS, ANSYS, COSMOS, Z88

Moderatoren: ccad, mz15, auroraIco, Lehrstuhl

Antworten
Benutzeravatar
Sebastian
Preprocessor
Beiträge: 51
Registriert: Di 7. Feb 2012, 10:48
Wohnort: Cape Town, South Africa
Kontaktdaten:

Import error

Beitrag von Sebastian »

I tried to import a step file into Z88 and got the following result:
stp error.png
(58.75 KiB) 920-mal heruntergeladen
The same file as an stl imports like this:
stl correct.png
(74.35 KiB) 920-mal heruntergeladen
Why is the step file not importing properly?
Benutzeravatar
mz15
Site Admin
Beiträge: 266
Registriert: Do 5. Aug 2010, 19:23

Re: Import error

Beitrag von mz15 »

Hello Sebastian

Since the STEP converter is open source and does not come from our team, I can not fully answer the question.
However, the converter can handle properly only with the STEP protocol AP203. If your file in STEP AP214 format that can possibly lead to errors.

Sincerely
Markus Zimmermann
Benutzeravatar
Sebastian
Preprocessor
Beiträge: 51
Registriert: Di 7. Feb 2012, 10:48
Wohnort: Cape Town, South Africa
Kontaktdaten:

Re: Import error

Beitrag von Sebastian »

mz15 hat geschrieben:... the converter can handle properly only with the STEP protocol AP203. If your file in STEP AP214 format that can possibly lead to errors.
Actually I tried both and got the same result :?
Benutzeravatar
mz15
Site Admin
Beiträge: 266
Registriert: Do 5. Aug 2010, 19:23

Re: Import error

Beitrag von mz15 »

Hello Sebastian

It is possible that even then the STL file generated from the STEP file is corrupt. Unfortunately we have no influence to. But if it works with the STL file, it is at least one partial success.

Sincerely
Markus Zimmermann
Benutzeravatar
Sebastian
Preprocessor
Beiträge: 51
Registriert: Di 7. Feb 2012, 10:48
Wohnort: Cape Town, South Africa
Kontaktdaten:

Re: Import error

Beitrag von Sebastian »

Thank you.
Benutzeravatar
mz15
Site Admin
Beiträge: 266
Registriert: Do 5. Aug 2010, 19:23

Re: Import error

Beitrag von mz15 »

You're welcome
Antworten